V03 UTV Wheel
NOTE: All Valor Offroad wheels require one of our installation kits
Choose options
NOTE: All Valor Offroad wheels require one of our installation kits
NOTE: All Valor Offroad wheels require one of our installation kits
What's Included
Each of our Valor Offroad UTV wheel styles is carefully wrapped in just the right amount of protective material to ensure a safe trip from our warehouse to your door. We are hyper selective in our packaging design and shipping to remove any unnecessary or redundant packaging.
Each wheel purchase comes with wheel and center cap. Each center cap includes all necessary installation hardware and will come pre-installed. See all Valor Offroad center caps.
All Valor Offroad beadlock wheels include all necessary mounting hardware on the bottom of the box. Please ensure you remove all packaging before descarding boxes.
Need lug nuts (installation kit)? Check out our full assortment of UTV wheel installation kits here or check out our fitment guide to figure out what Installation Kit you need.
BLACK OUT YOUR CENTER CAPS
Logo Swap Kit
We've got logo swap kits for all wheel styles and all cap styles for those of you wanting the black out look. Super easy to install (less than 5 minutes for all four caps) and won't break the bank.
SERIOUSLY, these UTV wheels are lightweight
UNDER 13 LBS
When we started developing the V03 UTV wheel, we wanted to see how light we could make a rugged offroad aluminum wheel. Mission accomplished. The V03 is the lightest UTV wheel in the industry. Available in ten-wide sand fitments and SRA options, the Valor Offroad V03 is the go to UTV wheel style when you want to shave weight.
SAND APPROVED
LIGHT WEIGHT STUNNER
The 15x10 Valor V03 UTV wheel provides ridiculously lightweight and aggressive styling for 4x137 and 4x156 bolt patterns.
15x10 = 14.60 lbs
SOLID REAR AXLE
V03 -32mm
Built exclusively for our Solid Rear Axle (SRA) fans, the V03 ATV wheel is available in a 14x7 -32mm (2+5) for rear Honda fitments.
Have questions on your fitment? Check out our fitment guide here or call us (602) 935-0009
Standard Fitment
V03 +25mm
Clean split eight spoke mesh design with debossed V logo. Offroad inspired and reinforced inner lip. Engineered to exceed SAE 2530 safety specifications. Bolt-on shorty center cap with embossed white logo.
Valor Offroad
Alpha UTV Tire
Next level off-roading requires next generation products. The Alpha UTV tire by Valor Offroad was developed exclusively for the powersports industry. Made in the USA, tested in the Rocky Mountains, learn what makes The Alpha different from your current UTV tires.
INDUSTRY LEADING
LIGHT WEIGHT DESIGN
During the design phase, each Valor Offroad UTV wheel is over-engineered to prevent unnecessary wear on your vehicle. The V03 is one of the lightest UTV specific wheels on the market today. Learn why lightweight UTV wheels matter.
V03 14x7 +25mm = #12.02 lbs
V03 14x7 SRA -32mm = #12.46 lbs
V03 15x7 +25mm = #13.45 lbs
V03 15x10 +0mm = #14.60 lbs
V03 Detail
The V03 UTV wheel is available in a gloss black finish. The stock shorty center cap is matches in gloss black. We take a lot of pride in designing UTV products and finishes that will last you a lifetime of enjoyment.
We take a lot of pride in designing products and finishes that will last you a lifetime of enjoyment. All Valor Offroad products undergo a barrage of brutal safety and quality assurance tests so that no matter where you ride, or whatever mother nature throws your way, we've got you covered.
Looking for a custom fitment or custom finish? Check out all of our Valor Offroad center caps here.
The V03 UTV wheel is available in 4x110, 4x137, and 4x156.
Concerned whether this wheel will fit your UTV, SxS or ATV, or unsure what all of this bolt pattern noise is all about? Give us a call and we will make sure you're good to go. After hours? No problem, check out this handy wheel fitment guide that should help address most common fitments.
Each of our Valor Offroad UTV wheel styles is carefully wrapped in just the right amount of protective material to ensure a safe trip from our warehouse to your door. We are hyper selective in our packaging design and shipping to remove any unnecessary or redundant packaging.
Unless noted, your cap will match the finish of the wheel selection. Each cap includes all necessary installation hardware and will come pre-installed. See all Valor Offroad center caps.
Need lug nuts (installation kit)? Check out our full assortment of UTV wheel installation kits here or check out our fitment guide to figure out what Installation Kit you need.
Example: V03-1470P2510GB
V03: Style Number
14: Wheel Diameter
70: Wheel Width (7")
P25: Positive (+)25mm Offset
10: Bolt Pattern (4x110)
GB: Gloss Black Finish
14" WHEEL SPECS
Size: 14x7
Bolt Pattern: 4x110
Offset: +25mm (5+2)
Hub Bore: 86mm
Wheel Weight (LBS): 12.02
Max Load (LBS): 1000
Finish: Gloss Black
Cap: VCAP1-SHORTGB
Size: 14x7
Bolt Pattern: 4x137
Offset: +25mm (5+2)
Hub Bore: 112mm
Wheel Weight (LBS): 12.02
Max Load (LBS): 1000
Finish: Gloss Black
Cap: VCAP1-SHORTGB
Size: 14x7
Bolt Pattern: 4x156
Offset: +25mm (5+2)
Hub Bore: 132mm
Wheel Weight (LBS): 12.02
Max Load (LBS): 1000
Finish: Gloss Black
Cap: VCAP1-SHORTGB
Size: 14x7
Bolt Pattern: 4x110
Offset: -32mm (2+5)
Hub Bore: 86mm
Wheel Weight (LBS): 12.46
Max Load (LBS): 1000
Finish: Gloss Black
Cap: VCAP1-SHORTGB
15" WHEEL SPECS
Size: 15x7
Bolt Pattern: 4x110
Offset: +25mm (5+2)
Hub Bore: 86mm
Wheel Weight (LBS): 13.45
Max Load (LBS): 1000
Finish: Gloss Black
Cap: VCAP1-SHORTGB
Size: 15x7
Bolt Pattern: 4x137
Offset: +25mm (5+2)
Hub Bore: 112mm
Wheel Weight (LBS): 13.45
Max Load (LBS): 1000
Finish: Gloss Black
Cap: VCAP1-SHORTGB
Size: 15x7
Bolt Pattern: 4x156
Offset: +25mm (5+2)
Hub Bore: 132mm
Wheel Weight (LBS): 13.45
Max Load (LBS): 1000
Finish: Gloss Black
Cap: VCAP1-SHORTGB
Size: 15x10
Bolt Pattern: 4x137
Offset: +0mm (5+5)
Hub Bore: 112mm
Wheel Weight (LBS): 14.60
Max Load (LBS): 1000
Finish: Gloss Black
Cap: VCAP1-SHORTGB
Size: 15x10
Bolt Pattern: 4x156
Offset: +0mm (5+5)
Hub Bore: 132mm
Wheel Weight (LBS): 14.80
Max Load (LBS): 1000
Finish: Gloss Black
Cap: VCAP1-SHORTGB
TECHNICAL DETAIL
Stepped Lip
Aggressive inner lip detail and mid-offset design, The V03 UTV wheel is available in a deep, gloss black paint with matching cap.
QUALITY
Manufactured using only A356 aluminum with T6 heat treatment for one super strong wheel. Engineered to exceed SAE 2530 safety specifications.
Design
Clean mesh eight spoke design with debossed VALOR V logo. Offroad inspired and reinforced inner lip. Lightweight spokes for easy wash-out.
Safety
Strong 1000 lbs. load rating to ensure you get back to the trailhead or basecamp when you want to. Backed by a lifetime limited structural warranty.
BOLT-ON
SHORTY CAP
All Valor Offroad UTV wheels come stock with our industry first 15mm bolt-on shorty cap. Why run a bulky cap when you can have the shorty. We do offer a tall center cap and a center cap riser for those of you with special hub clearance needs, click below for our optional cap fitments.
